Holder for 1 cleaning rod
Cleaning rods hang upright on the safe wall, out of the guns' way. Shaft and handle diameters can be set for each slot. The configurator below is already set to this option — change the count or sizes and 3D, drawings and price update instantly.
Set the count with the buttons above; each slot's Ø — in the boxes, left to right.
Slot = shaft + 1 mm. The handle sits in a seat of its Ø — a flat-bottom counterbore or a 45° cone.
Large items and batches cost less; 10+ pcs — −30 % on everything
About this option
For one or two rods — one for a rifle and one for a pistol, or two calibres. Small enough for the safe's side wall or door.
Specifications
- SKU: TSH1-9x26P-S
- Slots: 1, Ø9 mm shaft, Ø26 mm handle
- Size: 38 × 43 × 36 mm
- Mounting: screws or Ø25 neodymium magnets (+100 UAH per magnet)
- PETG 3D print, 3 colours
- Price: 156 UAH
FAQ
Will my rod fit?
By default — up to Ø9 mm shaft and Ø26 mm handle. If yours differ, set the diameters in the configurator for each slot.
How wide is it?
For 1 cleaning rod it is 38 mm wide and sticks out 43 mm from the wall.
How much is it?
156 UAH with screws; Ø25 magnets are 100 UAH each, fitted. 30 % off from 10 pcs; large items and batches cost less.
Can I change the size?
The configurator above is already set to this option — change the count or sizes and 3D, drawings and price update instantly.
Good to know
- The slot opens to the front: the rod goes in from the side, no need to lift it its full length.
- The 45° cone centres the handle and keeps the rod vertical; shelf 8–15 mm with 4 mm of straight slot under the cone.
- 10 mm back plate: countersunk screws or flush Ø25 × 8 magnets (M4 bolt + nut under the shelf, clear of the rod); ribs between slots.
- Printed in PETG without supports; the order includes one solid STL.