Wall-mounted pistol shelf
The pistol drops muzzle-down into a slot in the shelf and the slide rests in a V-cradle. Mounts to the safe wall with screws or two magnets. 3D printed — pick the size and number of slots, 3D and price update instantly.
Width — slide thickness + 7–8 mm; length — from the back of the slide to the trigger guard at shelf level + 5 mm; depth — how far the pistol sinks below the shelf.
A different colour for the shelf top (3 mm with chamfer) — two-colour print, +5 %.
weight based on a test print (NP2 — 195 g)
Over 250 g — every gram 30 % cheaper; from 10 pcs — 30 % off everything
Good to know
- Standard follows the 4-pistol model 180 × 110 × 83 mm: slot 33 × 78 mm, pitch 43.3 mm, 15 mm shelf, 10 mm back plate; compact (Makarov) is fitted to the PM outline: slot 31 × 70 mm, depth 75 mm, pitch 41.3 mm.
- Screws go through countersunk holes in the back plate; Ø25 × 8 mm countersunk magnets sit in pockets on the wall side and are fixed with an M4×16 countersunk bolt and M4 nut; 2 magnets fitted — 200 UAH.
- Printed in PLA without supports (back plate on the bed); the order includes an STL file.
FAQ
How is it mounted?
2–3 countersunk screws or two Ø25 × 8 neodymium magnets (M4×16 bolt and nut) on the steel safe wall.
Which pistols?
Standard — Glock 17/19, SIG, CZ; compact — Makarov; custom sizes available.
Two colours?
Yes, the shelf top can be another colour — +5 %.